Upgrading VCX Server Software from 7.0 to 7.1

91

eAnswer the questions appropriately for the server being upgraded.

fPerform the Install Upgrade Images > Switchover Version command again, as described previously in step i.

gTo verify the version numbers of the newly installed software, click each component from the explorer tree and click the Identification tab.

hClick Refresh all to confirm that the latest software has been installed.

The software versions displayed for a single server may differ from each other. To correct this and make sure you are viewing the latest values, click Refresh all.

6Stop the region 1 VCX data server before upgrading the region 2 VCX data server.

a From the EMS client explorer tree, for the region 1 VCX data server, click 3Com VCX IP Telephony Server.

b Expand 3Com VCX IP Telephony Server, and click 3Com VCX Data Server.

c Right-click3Com VCX Data Server, select Maintenance, and then click Hard Shutdown.

7Stop replication between the region 2 and 1 VCX data servers.

a From the EMS client explorer tree, for the region 2 VCX data server, click 3Com VCX IP Telephony Server.

b Right-click3Com VCX IP Telephony Server, select Database Replication, and then click Drop Replication.

8Upgrade the region 2 VCX data server. Repeat step a through step j in step 5 except perform the steps on the region 2 VCX data server.

9Stop the region 2 VCX data server.

a From the EMS client explorer tree, for the region 2 VCX data server, click 3Com VCX IP Telephony Server.

b Expand 3Com VCX IP Telephony Server, and click 3Com VCX Data Server.

c Right-click3Com VCX Data Server, select Maintenance, and then click Hard Shutdown.

10Upgrade the region 2 VCX data server database on region 1.