72CHAPTER 6: CONFIGURING THE SIP PHONE DOWNLOADER
1Launch EMS and discover the server that the SIP Phone Downloader is installed on. The navigation tree looks similar to Figure 1.
Figure 1 SIP Phone Downloader Configuration Tab
2Click 3COM Application Downloader.
3From the Properties tabs, click Configuration.
4Set the following attributes by
a LocalDeviceNameAdmin — Use //dev//eth1, which is your NIC device.
Make sure the NIC device has read and write permissions for the cworks user; otherwise, change the permission on this device or run this application as the super user.
bLocalIPAddressAdmin — the IP Address of the server the SIP Phone Downloader is installed on. It picks a default.
cLocalIPPortAdmin — Do not change this since it cannot be configured on the 3Com phone.
5Click Save all.