
Configuring Replication for the VCX Data Server | 31 |
Configuring | This section provides instructions on how to setup replication, check |
Replication for the | replication, delete replication errors, and drop replication for the VCX IP |
VCX Data Server | Telephony Server data server. |
Setting Up This section provides instructions on how to setup replication for a VCX Replication for a VCX data server. This will only setup replication in one direction. You need to
Data Server repeat these steps for each set of VCX data servers you want to replication between.
1From the EMS client explorer tree, for the VCX data server you want to connect to another VCX data server from, click 3Com VCX IP Telephony Server.
2In the
3From the Master Def Site IP Address field, enter the IP Address of the master definition site (usually the region 1 primary VCX data server).
4From the Master Site IP Address field, enter the IP Address of the master site (usually the region 2 primary VCX data server).
5From the Site ID field, enter the site ID of the Region 1 VCX data server.
6Click Save All.
7
8Repeat step 1 through step 7 to setup replication from the other direction.
Dropping Replication This section provides instructions on how to drop replication for a VCX for a VCX Data Server data server. This will only drop replication in one direction. You need to
repeat these steps for each set of VCX data servers you want to drop replication between.
1From the EMS client explorer tree, for the VCX data server you want to drop replication from, click 3Com VCX IP Telephony Server.
2
Repeat step 1 through step 2 for any other direction you need to drop replication for.