3M #3960 3M Rapid Detection Reader Setup, To set-up 3M Rapid Detection Reader, Barcode Scanner

3M™ Rapid Detection Reader Unpacking and Setup

Item

Barcode Scanner

Catalog # 3967

Description

Omni-directional, hands-free barcode scanner with cradle for entering Operator and Patient/Sample ID. The barcode scanner is shipped in the correct configuration and is ready for use after connecting to the CM via USB. Symbol Technologies Inc. model LS9208. Additional information available at www.symbol.com, 1.800.653.5350 or 1.631.738.2400.

3M Rapid Detection Reader Setup

The 3M Rapid Detection Reader is comprised of:

§3M RAPID DETECTION Control Module (CM)

User interface and connectors for all peripherals. Stores and displays test results (view, print, transfer, search, filter/sort)

§3M RAPID DETECTION Test Module (TM)

1 – 3 TMs per CM

Each TM has two test cartridge ports for performing simultaneous 3M RAPID DETECTION Tests

§3M RAPID DETECTION Reader Configuration Utility Software (RCU) CD allows customized settings for the 3M Rapid Detection Reader

§Power supply and interconnect cable

§USB flash drive

Pre-configured with 4 subdirectories (folders) named: patient, lqc, iqc and log, for use in bi- directional information transfer in a non-networked environment. Also contains “File Converter 1_1.xls”. See Manually Transferring/Printing Results or Logs section.

To set-up 3M Rapid Detection Reader:

1.Place the 3M Rapid Detection Reader components on a stable work surface within reach of an electrical outlet. Access to the back of each module is required to connect components.

2.Remove dust protection stickers from TM ports

3.Connect the TM and any optional devices to the CM using the supplied interconnect cable(s). Refer to Figure 1 for connector locations.

Refer to manufacturer’s instructions for optional printer or barcode scanner for additional information on set-up for these accessories.

4.Connect the supplied power cord to the CM. Plug the other end into a wall socket.

5