Aastra Telecom 6757I manual Installation and Setup

•Power source

For Ethernet networks that supply in-line power to the phone (IEEE 802.3af):

—For power, use the Ethernet cable (supplied) to connect from the phone directly to the network for power. (No 48v AC power adapter required.)

For Ethernet networks that DO NOT supply power to the phone:

—For power, use the 48V AC Power Adapter (included) to connect from the DC power port on the phone to a power source.

or

—(optional) For power, use a Power over Ethernet (PoE) power injector or a PoE switch. A PoE power injector is available as an optional accessory from Aastra Telecom. Contact your Administrator for more information.

Installation and Setup

If your System Administrator has not already setup your 6757i phone, please refer to the Aastra 6757i Installation Guide for basic installation and physical setup information. For more advanced administration and configuration information, System Administrators should refer to the

Aastra SIP IP Phone Administrator Guide.

Introduction

Model 6757i IP Phone User Guide 3