Switch UI Focus to Ringing Line

You can configure a feature on the 6757i that controls the behavior of the phone when it receives an incoming call when it is already in a connected call. When a call comes into the phone, and the phone is already on a connected call, the phone switches focus to the ringing line to enable the user to see who is calling them. You can turn off this functionality so that the phone stays focused on the connected call. You can do this using the Switch Focus to Ringing Line parameter in the Aastra Web UI.

Configuring “Switch Focus to Ringing Line” Using the Aastra Web UI

Aastra Web UI

Use the following procedure to enable or disable the “Switch Focus to Ringing Line” using the Aastra Web UI.

Note: "Switch Focus to Ringing Line" is enabled by default.

1. Click on Basic Settings->Preferences->General.

2.The “Switch Focus to Ringing Line” field is enabled by default. To disable this field, uncheck the box.

3.Click to save your settings.

Additional Features

Model 6757i IP Phone User Guide

223

Page 231
Image 231
Aastra Telecom 6757I manual Switch UI Focus to Ringing Line, Model 6757i IP Phone User Guide 223