Using Intercom
On the 6757i, you can use the Icom key to automatically connect with a remote extension. By default, the Intercom key is configured as Key 4 on the top set of softkeys.
Intercom
Key
Using the Icom Key
IP Phone UI
1.Press the Icom key.
2.Enter the extension number of the person you wish to intercom or the BLF key for that extension.
3.After a beep tone, your phone automatically connects with the remote extension and you can speak through its speaker.
4.To cancel intercom, press or the Cancel key.
5.When you are finished speaking, hang up the phone by placing the handset back
pressing or the line/call appearance button for the active call. When you hang up, the remote phone also hangs up.
You can set specific incoming Intercom call features on the 6757i IP phone using the Aastra Web UI. The following table describes these features.
Incoming Intercom Features |
|
in Aastra Web UI | Description |
|
|
Microphone Mute | Allows you to enable or disable the microphone on the IP phone for |
| Intercom calls made by the originating caller. |
|
|
Auto Answer | Allows you to enable or disable the IP phone to automatically |
| answer an Intercom call. If |
| the phone plays a tone (if "Play Warning Tone" is enabled) to alert |
| the user before answering the intercom call. If |
| disabled, the phone rejects the incoming intercom call and sends a |
| busy signal to the caller. |
|
|
Making Calls
Model 6757i IP Phone User Guide | 155 |