61
Installing the ARMC/3 module
Remote system management just got easier with the new ARMC/3 module. The module provides high performance KVM (keyboard-
To install the ARMC/3 module on system board:
1Perform the
2Locate the IPMI1 slot. If necessary, remove any boards or cables that prevent access to it.
3If necessary, open the holding clips of the IPMI1 slot.
4Remove the ARMC/3 module from its protective packaging, handling it by the edges.
5Install the ARMC/3 module.
(1)Align the module so that the notch on the IPMI1 slot fits the keyed edge of the module, then press the module at both ends to seat it fully into the slot.
When the module is properly installed, the holding clips will automatically lock in place.
To install the ARMC/3 module on the BMC module:
1 Perform the
