37
Opening the server
Caution: Before you proceed, make sure that you have turned off the system and all peripherals connected to it. Read the
You need to open the server before you can install upgrade components. The front bezel and (left) side panel are removable to allow access to the server’s internal components. Refer to the following sections for instructions.
Removing the side panel
1Perform the
2Remove the side panel.
(1)Remove the two screws located on the rear edge of the side panel.
(2)Press the side panel release button.
(3)Slide the side panel toward the rear of the chassis to disengage it.
