14
PP-32
KOOLMASTER PP-32 REV.01
ELBATHCTIWSPID
#hctiwS FFO NO
1 SEERGEDTIEHNERHAF SEERGEDSUISLEC
2 EDOMMP/MA EDOMSRUOH42
3 SNOLLAG SRETIL
4 RETAWFOSEHCNI SLACSAP
5TSIMROLLECLOOK NOITASNEPMOCHR ELBASID
TSIMROLLECLOOK NOITASNEPMOCHR ELBANE
6HRRETAEH NOITASNEPMOC ELBASID
HRRETAEH ELBANENOITASNEPMOC
7NOITALITNEVMUMINIM NOITASNEPMOCHR ELBASID
HRNOITALITNEVMUMINIM ELBANENOITASNEPMOC
8 DESUTON
9 DESUTON
01 DESUTON
11 DESUTON
21 DESUTON
!
WARNING
4.2 SETTING THE DIP SWITCHES
The PP-32 has 12 DIP switches (only the first 7 are used) which deter-
mine how the controller works. These switches are located on the
board inside the top cover.
To change the position of a DIP switch, use a small screwdriver or
similar object to move the switch to the desired position.
Pay attention when setting DIP switches. Since they are very
close to each other, it is easy to switch 2 switches at the same
time.
When the controller is shipped, all DIP switches are set
to the OFF position.
ALWAYS close the controller before applying power to it.
ON
123456789101112
ON
OFF