ADC EMU-830 user manual Logging into DSL Circuits

September 25, 2006 Chapter 3: Provisioning

9	AIS	Alarm Indication signal on any G.703	HDSL
		interface	G.SHDSL
10	LFA	Loss of Frame alarm on any G.703	HDSL
		interface	G.SHDSL
11	RAI	Remote Alarm Indication on any G.703	HDSL
		interface	G.SHDSL

Logging into DSL Circuits

To log into the console menu for an DSL card:

Step Action

1In the Main menu screen (Figure 3-3 on page 3-5), type the number 1 in the ENTER SELECTION field and press ENTER. The Enter line unit number field is displayed.

2Enter a line unit number and press ENTER. The HDSL card console menus display. See the line unit technical practice for details on console menu usage.

3To exit the HDSL console menus and return to the TAO Main menu screen, press CTRL+X or select Quit from the menu (if running HDSL unit firmware version 3.10).

Note: The V.24 Craft port is disabled on all HDSL cards when an EMU-830 is installed in the shelf. An HDSL card craft port can be used directly if the EMU-830 is removed from the shelf. The V.24 Craft Port is enabled on all G.SHDSL line cards.

LTPE-UM-3159-02 3-7