Agilent Technologies 6000 Series To decode CAN data

Displaying Data 6
6000 Series Oscilloscope User’s Guide 281
To decode CAN data
1Connect the CAN signal to one of the oscilloscope’s input
channels.
2Set up the trigger mode as described in “Triggering the
Oscilloscope” on page 127. You can use CAN trigger or
another trigger type.
3Select the CAN serial decode mode:
aPress the Acquire key.
bPress the Serial Decode softkey.
cIn the Serial Decode Menu, press the Mode softkey.
dUse the Entry knob (or repeatedly press and release the
Mode softkey) to select the CAN serial decode mode.
NOTE For CAN triggering setup see page148.
Display
decode
Decode
mode
Signal
setup menu
Return to
previous menu