316 6000 Series Oscilloscope User’s Guide
7 Saving and Printing Data
Printing the oscilloscope’s display
To print the oscilloscope’s display:
1Connect a USB printer to either the USB port on the front
panel or the rectangular USB host port on the rear panel. A
list of supported printers is on page 318.
2Press the Print key (labeled Quick Print on older models) on the
front panel.
3Press the Press to Print softkey.

Print options

You can print scale factors, print in color or grayscale, and
choose whether to print the waveform on a separate sheet of
paper (form feed) from the factors (if factors are selected). To
conserve printer ink, you can invert the graticule colors so that
the background is white instead of black.
The Print Configuration menu is displayed when you press the
Print key. The print option softkeys and the Press to Print softkey
are ghosted (not available) until a printer is connected.
NOTE The Print function remembers the screen you were on before you pressed
the print key. The last menu visited will be shown in the printout.
Therefore, if you have measurements (Amplitude, Frequency, etc.)
showing on the display before you select Print, the measurements will be
shown on the printout.
To print the display showing the Print Configuration Menu at the bottom,
press the Print key twice, then press the Press to Print softkey.
Choose
printer
Options:
Factors,
Invert,
Form Feed
Select
Color or
Grayscale
Prints the
waveform