Agilent Technologies 6000 Series - page 13

Contents
6000 Series Oscilloscope User’s Guide 13
To use Pulse Width triggering 142
< qualifier time set softkey 144
> qualifier time set softkey 144
To use Pattern triggering 145
Hex Bus Pattern Triggering 147
To use CAN triggering 148
To use Duration triggering 152
< qualifier time set softkey 154
> qualifier time set softkey 154
To use FlexRay triggering 155
Modes of VPT1000 Control/Operation 155
Setting Up the Oscilloscope and the VPT1000 156
Triggering on FlexRay Frames, Times, or Errors 160
To use I2C triggering 164
To use Nth Edge Burst triggering 170
To use LIN triggering 172
To use Sequence triggering 175
Define the Find: stage 177
Define the Trigger on: stage 178
Define the optional Reset on: stage 180
Adjust the trigger level 181
To use SPI triggering 182
Assign source channels to the clock, data, and frame
signals 184
Set up the number of bits in the serial data string and set values
for those data bits 187
Resetting all bits in the serial data string to one value 187