104 Chapter 2
Instrument Functions: A - L
Display
Instrument Functions: A - L
Factory Preset: –25 dBm, Off
Factory
Default: –25 dBm, Off
Terminators: dBm, mV, uV
Range: −370 dBm to 30 dBm
Remote Command:
:DISPlay:WINDow:TRACe:Y:DLINe <ampl>
:DISPlay:WINDow:TRACe:Y:DLINe?
:DISPlay:WINDow:TRACe:Y:DLINe:STATe OFF|ON|0|1
:DISPlay:WINDow:TRACe:Y:DLINe:STATe?
Example: :DISP:WIND:TRAC:Y:DLIN -32 dBm
:DISP:WIND:TRAC:Y:DLIN:STAT OFF
2.4.3 Display Line
Activates an adjustable horizontal line that is used as a visual reference line. The line has
an amplitude value that corresponds to its vertical position relative to the reference level.
The value of the display line appears on the left side of the display below the label Dl.The
display line can be adjusted using the step keys, knob, or numeric keypad. The units of
Display Line are determined by the Y-Axis Units setting under Amplitude.
Key Path: Display
State Saved: Saved in instrument state.
Factory Preset: –25 dBm, Off
Factory
Default: –25 dBm, Off
Terminators: dBm, mV, uV
Range: −370 dBm to 30 dBm
Remote Command:
:DISPlay:WINDow:TRACe:Y:DLINe <ampl>
:DISPlay:WINDow:TRACe:Y:DLINe?
:DISPlay:WINDow:TRACe:Y:DLINe:STATe OFF|ON|0|1
:DISPlay:WINDow:TRACe:Y:DLINe:STATe?
Example: :DISP:WIND:TRAC:Y:DLIN -32 dBm
:DISP:WIND:TRAC:Y:DLIN:STAT OFF