188 Chapter 3
Instrument Functions: M - O
Marker
Instrument Functions: M - O
3.1.8.4 Inverse Time
Sets the marker readout to Inverse Time, displaying the reciprocal of (sweep) time
between two markers. This function is only available when in both zero span and in a
delta-marker modes. If the markers are at the same x position, the time between them is 0,
so the reciprocal of sweep time is infinitely large. The display will show a very large
number.
Key Path: Marker,Readout
Remote Command:
See “Readout” on page 186 for this command.
Example: :CALC:MARK2:X:READ ITIM