Chapter 5 335
One-Button Measurement Functions
Mode Setup (Spectrum Analysis Mode)
One-Button Measurement Functions
Key Path: Mode Setup,Radio Std
History: Modified with PSA firmware revision A.04.00
Added with PSA firmware revision A.03.00
Remote Command:
Use[:SENSe]:RADio:STANdard[:SELect] See “Radio Std” on page 333.
Example: RAD:STAN IS95C
5.3.1.5 GSM/EDGE
Sets the specific parameters for the selected measurement (located under the “MEASURE
(Spectrum Analysis Mode)” key description) appropriate for industry standard GSM/EDGE.
Power Stat CCDF and Burst Power are the only measurements available for this standard.
Key Type: 1 of N menu
Key Path: Mode Setup,Radio Std
History: Added with PSA firmware revision A.02.00
Remote Command:
Use[:SENSe]:RADio:STANdard[:SELect] See “Radio Std” on page 333.
Example: RAD:STAN GSM
5.3.1.6 3GPP W-CDMA
Sets the specific parameters for the selected measurement (located under the “MEASURE
(Spectrum Analysis Mode)” key description) appropriate for industry standard W-CDMA. All
measurements except Harmonic Distortion and Spurious Emissions are available for this
standard.
Key Type: 1 of N menu
Key Path: Mode Setup,Radio Std
History: Added with PSA firmware revision A.02.00
Remote Command:
Use[:SENSe]:RADio:STANdard[:SELect] See ���Radio Std” on page 333.
Example: RAD:STAN W3GPP
5.3.1.7 cdma2000 MC-1X
Sets the specific parameters for the selected measurement (located under the “MEASURE
(Spectrum Analysis Mode)” key description) appropriate for industry standard
cdma2000-MC-1X. All measurements except Harmonic Distortion, Spurious Emissions,