Agilent Technologies N3280A Common Commands Syntax, ESE n, SRE n, Output Programming Parameters

6 – Language Dictionary

	Table 6-2. Common Commands Syntax
	*CLS	Clear status
	*ESE <n>	Standard event status enable
	*ESE?	Return standard event status enable
	*ESR?	Return event status register
	*IDN?	Return instrument identification
	*OPC	Enable "operation complete" bit in ESR
	*OPC?	Return a "1" when operation complete
	*OPT?	Return option number
	*RST	Reset
	*SRE <n>	Set service request enable register
	*SRE?	Return service request enable register
	*STB?	Return status byte
	*TRG	Trigger
	*TST?	Perform selftest, then return result
	*WAI	Hold off bus until all device commands done
	Table 6-3. Output Programming Parameters
	Parameter				Value
[SOUR:]CURR[:LEV][:IMM] and			−0.5125 mA to +0.5125 mA
[SOUR:]CURR[:LEV]:TRIG
[SOUR:]CURR:LIM[:IMM] and			+75∝A to +0.5125 A
[SOUR:]CURR:LIM:TRIG			−	75	∝	−	0.5125 A
					A to
*RST Current [Level] Value					0 A
*RST Current Limit Value					75∝A
[SOUR:]VOLT[:LEV][:IMM] and			−10.25 V to +10.25 V
[SOUR:]VOLT[:LEV]:TRIG
*RST Voltage Value					0 V
[SOUR:]DEL					0 − 1000

56