PowerFlex 40 and 400 Drive Control Logic
2
1
RUN | VOLTS |
FWD | AMPS |
REV | HERTZ |
PROGRAM | FAULT |
3
4
5
| 8 | 6 | |
|
| ||
|
| 7 | |
|
| POWERFLEX KEYPAD BUTTONS | |
|
| PHM640 | |
|
|
| |
Number | Name | Description | |
1 | Escape | Back one step in programming menu. | |
| Cancel a change to a parameter value and exit Program Mode. | ||
|
| ||
2 | Select | Advance one step in programming menu. | |
| Select a digit when viewing parameter value. | ||
|
| ||
3 | Up Arrow | Scroll through groups and parameters. | |
Down Arrow | Increase/decrease the value of a flashing digit. | ||
| |||
4 | Enter | Advance one step in programming menu. | |
| Save a change to a parameter value. | ||
|
| ||
5 | Stop | Used to stop the drive or clear a fault. This key is always active. | |
| Controlled by parameter P037 (Stop Mode). | ||
|
| ||
6 | Reverse | Used to reverse direction of the drive. Default is active. | |
| Controlled by parameters P036 (Start Source) and A095 (Reverse Disable). | ||
|
| ||
7 | Start | Used to start the drive. Default is active. | |
| Controlled by parameters P036 (Start Source). | ||
|
| ||
8 | Potentiometer | Used to control speed of drive. Default is active. | |
| Controlled by parameter P038 (Speed Reference). | ||
|
|
Figure 19
30 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | F232120 |