NOTE: The following programming instructions include information for two versions of HIMs (Human Interface Modules or parameter units). Refer to the nameplate information on the back of HIM to determine which programming information to use.

Displaying Metering Information

1.Install the HIM on the A-B drive.

2.Turn on machine power.

3.After three to five seconds of initialization, display will show the status display. If drive is in a faulted condition, fault will appear in display; otherwise, drive will read current status. Refer to examples below.

Faulted Drive

 

Normal Condition

 

 

 

Fault Description

 

Status of Drive

Fault Number

 

Frequency Commanded

 

 

 

 

 

Allen-Bradley 1305-Series AC Drives

6.Press the Enter key to choose Group Level. Display will read:

Choose Group

Metering

For earlier HIM versions, press the Enter key to choose Main File. Display will read:

Metering

Main File

7.Use the Up and Down arrow keys to select “Metering” if not displayed immediately.

8.Press the Enter key to choose Parameter Level. Display now shows parameters under the “Metering” Group.

Examples of Faults

Serial Fault

F 10

Max Retries Fault F 33

Example of Normal

Condition

Stopped

+0.00 Hz

Output Current

 

 

0.00 Amps

 

 

 

 

 

 

9.

Use the Up and Down arrow keys

to

 

select desired parameter display.

 

10.

From this point, press the Escape key

ESC to

 

move display up one Level (i.e., press the Escape

 

key three times to return to Operator Level).

4. Press any key to enter Mode Level,

ESC SEL

. Display will read:

Choose Mode

Display

5.Use the Up and Down arrow keys to select “Display” if not displayed immediately.

F232120

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

77