Chapter 3 | Hardware |
Overview
This chapter discusses the chips and features of the connectors in the following order:
•CPU (U4)
•Memory (DIMM1)
•
•PC/104 (J13A & B, J14C & D)
•IDE Interfaces (J22)
•CompactFlash Adapter (J23)
•Floppy /Parallel Interface (J20)
•Serial Interfaces (J5A/B, J3A/B)
•USB (J15A/B, J21A/B)
•Ethernet Interfaces (J10, J11)
•Audio Interface (J19)
•Video Interfaces (J8, J9, J7)
•Miscellaneous
♦Utility Interfaces (J18)
♦Reset Switch (SW1)
♦Keyboard/Mouse (J16)
♦Infrared (IrDA) Port (J17)
♦Real Time Clock (RTC)
♦Oops! Jumper (BIOS Recovery)
♦User GPIO signals (J2)
♦Temperature Monitoring
♦Serial Console
♦Watchdog timer
•Power Interface (J4, J6)
NOTE | Ampro Computers, Inc. only supports the features/options tested and listed in this |
| manual. The main integrated circuits (chips) used in the ReadyBoard 700 may |
| provide more features or options than are listed for the ReadyBoard 700, but |
| some of these chip features/options are not supported on the board and may not |
| function as specified in the chip documentation. |
|
|
ReadyBoard 700 | Reference Manual | 19 |
