A4 Available Options | APC 40 130KVA specs

Installation and User Manual

A4 Available Options

NMC (Network Management Card) option

This option is a communications card for supervision and protection of a three-phase device. Each UPS can be equipped with a maximum of four NMC communications cards.

Optional communications card with additional power relay

The UPS is already equipped with a relay communications card. But it is possible, with this option, to add another card with programmable power-relay functions.

Optional serial communications card

This option is an RS232 or RS485 serial communications card operating under the JBUS protocol.

AS4I option

This option consists of a low-power relay card for shut-off and scheduling functions.

Multislot option

This option consists of communications cards to concentrate the communication of two parallel-connected UPSs.

External synchronization module option

With this option, a SYNIN communications card and two circuit breakers are added to each UPS unit. The external synchronization module issues a reference frequency used to synchronize the UPS units.

CAUTION Check the different input/output signal levels (LV, ELV, SELV) on the optional communication cards (4) and use appropriate wiring.

86-174010-00 B00

Appendices

A — 7

Image 63

APC 40 130KVA user manual A4 Available Options

Contents

MGE Galaxy Page Schneider Electric MGE Galaxy MGE Galaxy Important Safety Instructions Environment This page left blank intentionally Contents Appendices MaintenanceWarranty and Product Registration Service Solutions Team Three Phase Products Tables Figures UPS Serial Number Safety Rules Safety of personsSpecial precautions MGE Galaxy Symbol Usage Document IconsDisplay Icons Introduction Setup and InstallationMaintenance Section Descriptions Viii Introduction ScopeGeneral Description UPS power rating KVA Dimensions H x W x D MGE Galaxy 5000 UPS System with Battery Single Line Diagram Inside MGE Galaxy 5000 UPS Cabinet Inside the UPS Cabinet, Access to Connections UPS Cabinet Bottom View Layout Power Connection Terminals User-Machine Interface Display User-Machine Interface Display Display Screens Display Screens Relay Communication Card Relay Communication Card This page left blank intentionally Introduction Location Setup and Installation Layout of Cabinets Electrical Specifications Single UPS With Common Normal and Bypass AC Inputs Connection of Power Cables in a Single UPS UPS Can // interconnections Exchange-current interconnections Interconnections with the external system bypass cabinet Parallel Configuration for Increased Capacity Four UPSs XMB08 XMB07 XMB06 11 Adding Communication Cards Adding Communication Cards 12 Connection of Relay Communication Card Connection of the Relay Communications Card Communications Card Connection Example Characteristics of the input contacts Routing the Control/Communications Cables Single UPSGeneral-shutdown cable Parallel UPS Can cablesExchange-current cables Shutting Down a Single UPS Operation Shutting Down a Parallel Configuration Restarting a Single UPSLoad is protected by the UPS Load is protected by the UPSs Restarting a Parallel Configuration Operation of Mimic-Panel LEDs Single UPS Start Sequence on Normal AC InputSingle UPS Start Sequence on Bypass AC Input Operating Modes Load on Battery Power Frequency Access to the Personalization FunctionsPersonalization Settings Operating Mode UPS Personalization Display Messages List Standard Mode Programmable ModeOperation of the Relay Communication Card Dry Contacts Load on Automatic AUTOMATIC-BYPASS Battery Temperature Fault This page left blank intentionally Life Cycle Monitoring LCM MaintenanceIdentification of Alarms Battery power UPS Isolation UPS Isolation Single UPSLoad is no longer protected by the UPS Parallel UPS Configuration Without External Bypass Cabinet Shutdown and isolation of all the UPSs Parallel UPS Configuration With External Bypass Cabinet Return to the Normal Operation Return to Normal Single UPSUPS starts automatically LED 31 is on Parallel UPS Configuration Without External Bypass Cabinet UPS restarts and LED 31 is on Restart the UPS for which all switches are set to OFF Return to Normal Parallel UPS With External Bypass Cabinet Servicing Batteries Training CenterHz Training Center This page left blank intentionally A1 Electrical Characteristics AppendicesSelection of Protection Devices Limitation Input/Output Characteristics Bypass AC input Load outputInverter A2 Maximum Allowable Power for Parallel UPS Units A3 UPS Cabinet Major Internal Components MGE -Galaxy A4 Available Options A5 Environment Page Product Information MGE Galaxy Warranty and Product RegistrationWarranty Extension Warranty+ User Information Technical Support and Product Services Scheduling Field Service Engineer SupportReturn Policy for Repair of Three Phase Products RGA MGE Galaxy AWG Glossary Igbt VAC MGE Galaxy Use this form Reorder Form Scenic Avenue Costa Mesa, CAPage Page Contact Information