Assemble the Brackets and Extenders

Follow these steps to assemble the brackets and extenders for the depth of your rack.

For a Rack 24 to 29 Inches Deep

1Gather the two large brackets (items A1 and A2) and the two longer extenders (item B in the illustration below), along with the necessary screws:

m six short screws for assembling two brackets and extenders m four long screws for securing the brackets to the rack

m two mounting screws for attaching the system to the rack

B

Short screws

A1 and A2

Mounting template

2Place the cut-out area of the extender (B) over the three posts that extend from the wider side of the bracket A.

B

Pass three of the short

 

screws through the slot in part B and

 

attach them to part A1 or A2. Tighten them securely.

 

Make sure part B fits under the tabs on part A1 or A2.

A1 or A2

3Fasten the bracket and extender together using three short screws and tighten the screws. Note that you can still slide the extender backward and forward.

Mounting Xserve RAID in a Rack

27

Page 27
Image 27
Apple NMB-003 manual Two mounting screws for attaching the system to the rack, Assemble the Brackets and Extenders