Shoulder Set S-3

The shoulder set S-3 has adjustable grips and an integrated shoulder pad which allows comfortable hand-held camera operation.

Mounting

•Attach the shoulder set with the central clamp screw into the tripod thread (3/8") on the camera base ensuring that the index pin on the shoulder set aligns correctly with the locating hole in the camera base.

•Adjust and position the handgrips on the shoulder set

.

•Connect the cable to one of the RS-sockets on the right side of the camera

Camera Handgrip

The anatomically-shaped camera handgrip with the RUN push button is intended for shoulder operation. The shoulder pad can be used for more comfortable use of the camera on the shoulder.

Mounting

•By turning the intermediate ratchet mounting ring, the angular outward position of the handgrip can be changed to the operator’s personal fit.

•Attach the handgrip to the right rosette mount on the camera in the desired angle of inclination.

•Connect the cable to one of the RS-sockets on the right side of the camera.

Installation

11