The Main Menu

When the camera control unit is switched on the main menu appears on the display. This allows access to the sub-menus and shows the speed currently set on the camera. It also shows if the camera is switched off (OFFLINE), in Standby (STANDBY) or is running (RUN).

•Choose the desired menu with the keys 1, 3, 5, 6 or 8. The displayed menus SHUTTER (2), FORMAT (4) and PROGRAM (7) are for the ARRIFLEX 535 and have no function on the ARRIFLEX 16SR 3.

The SPEED Menu

With the SPEED menu any desirable speed within the acceptable range of 5 to 75 fps at 1/1000 fps can be exactly set. On the HS camera speeds from 5 to 99,999 fps at 1/1000 ps and from 100 to 150 fps at 1/10 fps can be exactly set. Speed can be changed in Standby as well as when running. In both upper lines of the CCU the speeds currently set on the camera control unit and on the camera are displayed.

•Switch the sliding switch on the camera to PS/CCU.

•With keys 1 to 5, enter one of the listed standard speeds from the SPEED menu - the chosen speed is displayed in the uppermost line. The displayed speeds

6:-24 (backwards) and 7: -25 (backwards) are intended for the ARRIFLEX 535 and have no function on the ARRIFLEX 16SR 3.

•With the SEND key transfer the chosen value to the camera.

Alternatively any desirable speed within the acceptable range can be chosen:

•Switch the sliding switch on the camera to PS/CCU.

•Depress key 8 in the SPEED menu.

•Enter the desired speed, comma position with „.“.

•If not all positions after the comma were entered, finish the input with the ENTER key - the chosen speed is displayed in the uppermost line on the CCU.

•Transfer the chosen value to the camera with the SEND key.

Accessories

71