
Appendix
Camera-Checks
Checking Camera Readiness
Wiring | Check complete wiring and the position of the plug. |
|
|
Electronics | Switch through all modes and check the set values. |
|
|
Time Code | Set TC and check |
|
|
Batteries | Check power supply to all batteries in display mode 3 (take counter/power |
| supply): U > 20 V. |
|
|
Exposure Meter | Check set film speed. |
|
|
Fiber Optic Screen | Check if the desired fiber optic screen is in place. |
| Check the cleanliness of the fiber optic screen with the ARRIGLOW. |
|
|
Fluff Check | Remove the lens and magazine. Turn the mirror shutter forwards with the inching |
| knob and check the film gate for fluff on both sides. |
|
|
Film Track | Carefully examine the film track and film gate for deposit or scratches. |
|
|
Optics | Check the cleanliness of the optic surfaces of the lens and viewfinder. |
|
|
Film Running | Let the camera run very slowly for a few seconds with the PHASE key. Check if the |
| set shutter angle appears in the display. Let the camera run a little further. Check if |
| the |
|
|
96