10. Accessories

Camera Control Unit CCU-1

The camera control unit CCU-1 for the ARRIFLEX 535 and 535B can also be used on the 16SR 3. It enables manually controlled remote control of the following functions:

-Switching the camera on or off.

-Choosing the speed.

-Checking the set values.

-Displays and use of the film counter.

-Displays and setting TC-time (time code) and TC-user bits.

-Display of the set TC-sensitivity through the REMOTE- menu.

Setting TC-time and TC-user bits can only be carried out through the camera control unit or through external synchronization.

The camera control unit is supplied with power by the camera. If the camera is not plugged in the camera control unit will be fed by the internal batteries. As the battery unit limits the life of the camera control unit to approx. 5 hours, the display illumination switches off approx. 10 sec after last being touched when it is being

fed by batteries, and the camera control unit switches off after approx. 5 min.

Replacing the Batteries

•Open the battery compartment with a coin.

•Pull out the battery pack.

•Use batteries as designated on the battery pack.

Accessories

69