Optics

Removing the Lens

The adapter remains on the camera.

•Press in the release button completely.

•Unlock the lens by turning counter-clockwise.

•Pull the lens straight out of the adapter.

•Immediately replace the protective cover for the compensation adapter or another lens.

Removing the Lens Port Adapter

•Open the bayonet lock.

•Pull the adapter straight out of the camera.

•Immediately replace the protective cover or another lens.

Lens Support

When heavy lenses are used install the lens support. To support heavy lenses, the lens support bridge LS-7 and a support ring which is compatible with the lens has to be installed.

Attaching the Lens

•Mount the support ring on the lens. This is usually done only once. The support ring then remains on the lens.

•Place the lens support from above on the support rods and with slight pressure let it click in.

•Attach the lens to the camera and hold it firmly in place.

•Push the lens support under the support ring.

•Tighten down the knurled knob and pull tight

the clamp lever on the lens support .

The clamp lever can be locked in different positions:

•Unlock the clamp lever by pulling it outwards and turn to the desired position.

36