Accessories

•Insert the battery pack into the camera control unit and close the battery compartment.

Pay attention to the correct polarity of the battery pack!

Plugging in the Camera Control Unit

•Plug the cable KC 24 (2,4m) or KC 30 (20m) into the

socket on the side of the camera control unit, pressing the slide on the plug in the direction of the plug.

•Plug the cable to the CCU-socket on the camera.

•Switch on the camera.

•Switch on the camera control unit with the red key

on the side.

Key Functions in all Menus

RUN

switches the camera on or off.

SEND

sends the chosen values to the camera.

HELP

shows the help text for the activated menu.

 

Cannot be used in the input mode. The help

 

text can be left by pressing the ENTER key.

EXIT

ends input or leaves the activated menu.

LIGHT

switches display illumination on or off.

push button on/off

bushing

Error Readings

In the case of functional errors on the camera the display on the camera control unit will show an error reading in the upper right-hand corner. The error reading remains visible until the error has been cor- rected. If the error is caused by the user, an error reading appears and disappears the next time a key is depressed. Simultaneously an acoustic signal is audible; this can however be turned off.

70