•Using the manual inching mechanism adjust the mirror shutter so that the ladjustment screw for the shutter

adjustment is visible at the bottom of the lens mount, below the mirror shutter.

•Insert the special key into the adjustment screw.

The mirror shutter can be damaged if the special key with the protective rubber covering is not used!

•By pressing, engage the adjustment screw with the special key and hold the mirror shutter with the manual inching mechanism in its position. While enlarging the opening angle it is possible to support the mirror shutter on the special key, in which case it does not need to be held in position by the manual inching mechanism.

•Set the desired opening-angle of the mirror shutter with the adjustment screw (to reduce the angle turn counter-clockwise, to enlarge the angle turn clock- wise). While adjusting the shutter angle, the shutter can also be held with your finger in the black center, preventing it from turning while adjusting the angle. Be sure not to touch the mirror area of the shutter.

Checking the Mirror Shutter Setting The setting of the mirror shutter can also be checked with a lens in place.

•In Standby, depress the PHASE pushbutton until the wide angle symbol appears in the display. After approx. 1 sec. the selected opening-angle will be shown in the upper line of the display.

Camera Body

27