Power Supply

On-Board Battery NC 24/1,2

Capacity 1,2 Ah. For mobile operation.

•Plug the on-board adapter into the BAT-socket and secure it with the knurled screw.

•Slide the on-board battery onto the on-board adapter and clip onto the magazine - the magnet holder keeps it securely in place.

Battery NC 24/7 R

Capacity 7 Ah.

For use see product description NC 24/7 R.

•Connect the battery cable KC 20 or the coiled battery cable KC 29 into the BAT-socket on the camera.

•Make sure that the plug is locked in securely.

-Do not open the batteries!

-Charge batteries only with the ARRI charger!

-Do not bypass the fuse or temperature switch! (Danger!)

-Do not heat NC-batteries!

-Do not short-circuit NC-batteries!

Charger NCL 24 R

For all 24 V batteries.

To charge the on-board batteries NC 24/1,2 the charger-adapter cable KC 38 is required.

For use see product description NCL 24 R.

Double Charger NCL 24/1,2

To enable two on-board batteries to be charged simulta- neously.

For use see product description NCL 24/1,2.

Mains Unit NG 12/24 R

The mains unit is suitable for use in the studio. Its use is recommended when using electronic accessories with a higher power consumption (e.g. eyecup-heating, Video- Assist-System, Lens-Control-System). The mains unit has a safety switch-off device overheating and a power limiter.

For use see product description NG 12/24 R.

14