Camera Body
Attaching the Magazine onto the Camera
Do not use HS magazines on a standard camera or standard magazines on a HS camera.
•If appropriate press the button 
on the video carrying handle and swing the handle to the left side of the camera.
•If appropriate swing back the
•Remove the loop protector and the aperture cover plate.
•Center the film loop in reference to the pressure plate, and make sure the film is held in place by the four guide pins.
•Flip the safety latch to the back 
.
•Grasp the upper part of the magazine and hold it on approx. 30° slant (two o'clock) position.
•Push the pilot pin 
on the magazine forwards into the camera housing.
•Carefully press the back part of the magazine down- wards until it locks in place.
The red markings on the casing should no longer be visible!
• Flip safety lever 
to the front.
•Check that magazine is locked securely by lifting the back part of the magazine.
•If appropriate swing back the
•Set the film sensitivity on the camera´s exposure meter and reset the film counter.
•Check the TC sensitivity setting on the magazine.
30