ARRI 16SR3 Magazine Door

Removing the Loop Protector

•Using slight pressure push the loop protector upwards.

•Swing out the lower side and remove the loop protector.

Attaching the Loop Protector

•Engage the upper side of the loop protector from

below into the pilot pin on the magazine.

•Swing the loop protector into the magazine, and with slight pressure push in to lock.

Magazine Door

The magazine door can only be opened or closed if the magazine has been removed from the camera.

Opening the Magazine Door

•Open the locking latch .

•Hold down the red safety knob depressed and turn the locking latch to „A/O“.

•Pull on the locking latch to open the magazine door.

Closing the Magazine Door

•Make sure that the locking latch is in position „A/O“.

•Push the magazine door firmly and turn the locking latch clockwise to the locked position - the safety knob locks audibly into place.

Magazines

safety push button magazine cover lock

Never close the door when the locking latch is in position „closed“ as otherwise the latch could be damaged. Never hold the magazine by the door as otherwise the hinge could be damaged.

17