Magazines

Film Core, Core Holder and Clamp Core

A film core adapter and a collapsible core are supplied with the camera; these are placed

on the supply and take-up film spindles.

The film is normally delivered on a core. The film core is attaches to the core adapter on the feed side. The core adapter is secured on the shaft with two clamp levers which automatically unlock when it is pulled off the shaft. On the take-up side the collapsible core is used. It usually remains on the shaft. The collapsible

core can be pulled off easily once the lock has been opened. When the collapsible core is placed on the shaft it locks automatically in place.

Cleaning the Magazines

Keep the inner side of the magazine extremely clean! Clean the magazine every time you load or unload it. Use only an optic brush!

Swing away the guide roller arm back until it clicks - do not pull the guide roller arm upwards.

Clean the glass window for the film end sensor on the under side of the magazine with an optic cloth and cotton buds. If very dirty moisten the optic cloth with pure alcohol.

retaining levers standard core adapter

film spindle supply-side

Andruckrolle

collapsable core adapter

film spindle take-up-side

release latch

idler roller time code recording unit

18