Maintenance
Replacing the Electronic Housing
If the electronics break down the entire electronic housing is to be exchanged. The electronic housing on the standard camera is not the same as that on the HS camera and should not be interchanged with it.
• Place the camera without the magazine upside down |
| |||
on a soft surface. |
|
| ||
• Unscrew the 6 screws |
| SW 2 (key width 2 mm) |
| |
|
| |||
in the bottom of the camera. |
|
| ||
• Turn the camera around again. |
| |||
• Pull up the camera shaft. |
| hex screws | ||
• Replace the electronic housing. | ||||
| ||||
•Remount the camera, taking care that the intermediate metal plate is placed on the new electronic housing before mounting.
94