3. Power Supply | camera front |
The camera is intended for use with 24 V DC. The acceptable voltage ranges are from 20 to 32 V DC. If the voltage trops below 18 V or rises above 34 V, a protective device prevents the camera from being turned on.
Changing the Fuses
Main fuse: 10 A Picofuse
Accessory fuse: 2,5 A Picofuse
•Remove the
•Remove the magazine.
•Unscrew the cover FUSE on the electronic housing with a coin.
• Take a new fuse from the cover FUSE.
• Exchange the defective fuse using tweezers or a Hirschmann clamp. The accessory fuse is in the front, the main fuse at the rear.
•Rescrew the cover FUSE with a coin.
NOTE: In order to avoid future problems you should obtain replacement fuses as soon as possible. Fuses from other suppliers should be cut to size and bent as shown in the drawing on the right.
accessory fuse
main fuse
Power Supply
13