•Unscrew the 4 screws SW 1,5 (key width 1,5

mm)on the beamsplitter.

•Remove the beamsplitter at the bevelled edges (under the markings).

•Insert the desired beamsplitter and screw on with the

4 screws .

Mounting the Video Optic

•Attach the video handle without the video optic.

•Screw on with 4 screws, ensuring that the adjustment sockets for the beamsplitter and the carrying handle engage together.

•Attach the video optic to the video carrying handle.

•Screw tight with the knurled knob .

•Pull tight the clamp ring .

•Screw the video camera onto the C-mount thread on the video optic.

•Loosen the clamp ring approx. 15° (as seen in the direction of shooting, counter-clockwise).

•Turn the CCD-camera into the correct angle position (the marking on the back of the camera must stand upright).

•Pull tight the clamp ring.

•Screw the handles on the clamp ring into the desired position SW 1,5.

locking lever

lock ring

focus ring

iris ring

Video-Assist-System

77