KVM Over the NET™ User Manual
(Continued from previous page.)
3.Enter the required information in the appropriate fields. A description of each of the fields is given in the table below:
Field | Description |
|
|
Group Name | A maximum of 16 characters is allowed. |
|
|
Description | Additional information about the user that you may |
| wish to include. A maximum of 63 characters is |
| allowed. |
|
|
Permissions | Permissions and restrictions for groups are set by |
| checking the appropriate boxes, as follows: |
| Windows Client allows group members to |
| download the Windows Client software, and access |
| the KVM Over the NETTM switch with it, in addition |
| to (or instead of) the browser access method. |
| Java Client allows group members to download the |
| Java Client software, and access the KVM Over the |
| NETTM switch with it, in addition to (or instead of) |
| the browser access method. |
| Power Management allows group members to |
| connect to Power on the Net™ devices. |
| View Only limits group members to only being able |
| to view the display of connected devices. They |
| cannot control port access, nor can they input any |
| keyboard or mouse signals to the devices they |
| view. |
| Force to Grayscale forces the group members’ |
| view of the remote display to be in grayscale. This |
| can speed up I/O transfer in low bandwidth |
| situations. |
| Note: If a user has permissions in addition to the |
| ones assigned to the group, the user keeps those |
| permissions in addition to the group ones. |
|
|
4.At this point you can assign users to the group by selecting the Members tab – the Members page is discussed on page 116. You can also assign the group’s port access rights by selecting the Devices tab – the Devices page is discussed on page 118.
Note: Optionally, you can skip this step now to add more groups and assign users to them, and come back to it later.
5.When your selections have been made click Save.
6.When the Operation Succeeded message appears, click OK.
112