KVM Over the NET™ User Manual
Additional Mouse Synchronization Procedures
If you use Manual Mouse Synchronization, you must perform the following operations on the servers that connect to the switch.
Note: 1. These procedures are to be performed on the servers attached to the switch’s ports - not on the client computer you are using to access the switch.
2.In order for the local and remote mice to synchronize, you must use the generic mouse driver supplied with the Windows operating system. If you have a third party driver installed - such as one supplied by the mouse manufacturer - you must remove it.
Windows:
1.Windows 2000:
a)Open the Mouse Properties dialog box (Control Panel → Mouse → Mouse Properties)
b)Click the Motion tab
c)Set the mouse speed to the middle position (6 units in from the left)
d)Set the mouse acceleration to None
216