Chapter 5. The User Interface
Macros
The Macros icon provides access to three functions found in the Macros dialog box: Hotkeys, User Macros, and System Macros. Each
of these functions is described in the following sections.
Hotkeys
Various actions related to manipulating the remote server can be accomplished with hotkeys. The Hotkey Setup utility (accessed by clicking this icon), lets you configure which hotkeys perform the actions.
The actions are listed in the left panel; the hotkeys that invoke them are shown in the panel at the right. Use the checkbox to the left of an action’s name to enable or disable its hotkey.
1.Highlight an Action, then click Set Hotkey.
2.Press your selected Function keys (one at a time). The key names appear in the Hotkeys field as you press them.
You can use the same function keys for more than one action, as long as the key sequence is not the same.
To cancel setting a hotkey value, click Cancel; to clear an action’s Hotkeys field, click Clear.
3.When you have finished keying in your sequence, click Save.
To reset all the hotkeys to their default values, click Reset.
55