Chapter 7. User Management
3.Under the Access or USB column, click the icon that corresponds to the port you want to configure to cycle through the choices, as shown below:
Icon | Meaning | Description | |
|
|
|
|
|
| The user can view the remote screen and can perform | |
| Full Access | operations on the remote server from his keyboard and | |
|
| monitor. | |
|
|
|
|
| View Only | The user can only view the remote screen; he cannot | |
| perform any operations on it. | ||
|
| ||
|
|
|
|
| No Access | No access rights - the Port will not show up on the User's | |
| list on the Main Screen. | ||
|
| ||
|
|
|
|
|
|
|
|
Note: You can use
4.Under Config, click the icon to toggle the choices. A check mark ( √ ) indicates that the user has permission to make changes to the KVM Over the NETTM switch configuration settings (see Chapter 8, Device Management); an X means that the user is denied permission to make configuration changes.
5.Under View Log, click the icon to toggle the choices. A check mark ( √ ) indicates that the user has permission to view the KVM Over the NETTM switch’s log files; an X means that the user is denied permission to view the files.
6.When you have finished making your choices, click Save.
7.In the confirmation popup that appears, click OK.
119