Chapter 11. Port Operation
The Toolbar Icons
The meanings of the toolbar icons are explained in the table below.
Icon | Purpose |
Click to skip to the first accessible port on the entire installation without having to recall the Port Access page.
Click to skip to the first accessible port previous to the current one without having to recall the Port Access page.
Click to begin Auto Scan Mode. The KVM Over the NETTM
switch automatically switches among the ports that were selected for Auto Scanning with the Port Select and Filter functions (see Filter, page 90). This allows you to monitor their activity without having to switch among them manually.
Click to skip from the current port to the next accessible one without having to recall the Port Access page.
Click to skip from the current port to the last accessible port on the entire installation without having to recall the Port Access page.
Click to recall the Port Access page.
Click to close the toolbar.
Click to invoke Panel Array Mode (see Panel Array Mode, page 161).
Note: The Local Console does not have this function. See the entry below for the Local Console icon and function.
This icon is only found on the Local Console. Clicking this button cycles you through the I/O module's compensation mode choices (Short, Medium, Long) depending on the length of cable used to connect a device to the switch. The length of the line in the icon changes to indicate which choice is selected.
157