Chapter 2. Hardware Setup
Rack Mounting
The KVM Over the NETTM switch can be mounted in a 19" (1U) rack. The mounting brackets can screw into either the front or the back of the unit so that it can attach to the front or the back of the rack.
Rack Mounting - Front
To mount the unit at the front of the rack, do the following:
1. Remove the two screws at the front of the unit.
Phillips head hex
M3 x 6
2.Use the M3 x 8 Phillips head hex screws supplied with the rack mount kit to screw the rack mounting brackets into the front of the unit.
Phillips head hex
M3 x 8
17