KVM Over the NET™ User Manual

PPP Modem Operation

Basic Setup

In addition to the browser and AP methods, the switch can also be accessed through its RS-232 port using a PPP dial-in connection, as follows:

1. Set up your hardware configuration to match the diagram, below:

:

Cat 5e Cable

SA0142

 

 

(DB9-M, DTE - DCE)

 

Serial Modem Cable

 

 

Phone Line

Modem

Remote

Operator

Modem

2.From your client computer, use your modem dial-in program to dial into the switch modem.

Note: 1. If you don’t know the switch modem’s serial parameters, get them from the switch administrator.

2.An example of setting up a modem dial-in program under Windows XP is provided on the next page.

3.Once the connection is established, open your browser, and specify 192.168.192.1 in the URL box.

Note: The default username and password are blank.

From here, operation is the same as if you had logged in from a browser or with the AP programs.

212