KVM Over the NET™ User Manual
Stacking and Rack Mounting
The KVM Over the NETTM switch can be stacked on the desktop or rack mounted in a variety of ways. The following sections take you through the procedures for each method.
Stacking
The KVM Over the NETTM switch can be placed on any appropriate level surface that can safely support its weight plus the weight of its attached cables. To place the KVM Over the NETTM switch, or to stack units if you are daisy- chaining them, remove the backing material from the bottom of the rubber feet that came with this package, and stick them onto the switch’s bottom panel at the corners, as shown in the diagram, below:
Note: To ensure adequate ventilation, allow at least 5.1 cm on each side, and 12.7 cm behind the unit for power cord and cable clearance.
16