KVM Over the NET™ User Manual

Log Server

Important transactions that occur on the KVM Over the NETTM switch, such as logins and internal status messages, are kept in an automatically generated log file. Specify the MAC address and a port number for the computer that the Log Server resides on in this panel. The valid port range is 1-65535. The default port number is 9001.

Note: The port number must different than the one used for the Program port (see Program, page 125).

Installation and operation of the Log Server is discussed in Chapter 12. The Log File is discussed on page 98.

SNMP Settings

If you want to use SNMP to help with your installation management:

1.Check Enable SNMP Agent.

2.Key in the IP address and the port number of the computer to be notified of SNMP trap events. The valid port range is 1–65535.

Note: The following SNMP trap events are sent: system power On, login failure, and system reset.

Syslog Server

To record all the events that take place on KVM Over the NETTM switches and write them to a Syslog server, do the following:

1.Check Enable.

2.Key in the IP address and the port number of the Syslog server. The valid port range is 1-65535.

Disable Local Authentication

Selecting this option will disable login authentication locally on the KVM Over the NETTM switch. The switch can only be accessed using LDAP, LDAPS, MS Active Directory, RADIUS or CC Management authentication.

130