Avaya 2 manual Example, True

Contents

RTSPNoActivityTimeout	The number of seconds Avaya IR will wait for a	15
	response from an MRCP server before sending a
	DESCRIBE message as a test of the connection.
	If a second timeout interval elapses with no
	response, Avaya IR decides that the server or the
	connection is out of service. It then places the
	server into the maintenance state called FOOS
	(facility out-of-service), logs the event, and raises
	an alarm.
	Reducing this interval will improve the speed at
	which lost connections are detected, but it will also
	increase the messaging overhead between Avaya
	IR and the servers.
	MRCP servers may use a similar approach to
	monitoring connectivity. If so, make sure that the
	interval set on Avaya IR s not higher than what is
	set on the server. If the interval on Avaya IR is
	inadvertently set higher than on the server, the
	server may erroneously assume that its connection
	to Avaya IR has failed when, in fact, it has not.
ResponseTimer	The number of seconds that an Avaya IR	5
	application will wait for a response from an MRCP
	server providing ASR or TTS support.
	Example:
	When applications attempt to allocate a speech
	processing resource, a SETUP message is sent to
	the server that provides that support and this timer
	starts. If Avaya IR receives no response to the
	SETUP request within the specified interval, the
	application is told that the allocation failed.
PerPortConnection	A setting that indicates whether the MRCP	TRUE
	implementation uses port 554 for a single
	connection for signaling or for multiple, per-port
	connections.
	If TRUE, multiple, per-port connections are used
	for signaling. (This is required in Avaya IR release
	1.2.1 and release 1.3? if the MRCP server is an
	IBM WVS.)
	If FALSE, a single connection is used for signaling.

Issue 1.0 April 2006 29