Security and Configuration
immediately, use the G3 PBX Link Change Utility. Refer to ‘‘Changing IP Address or Hostname of Active Link’’ later in this chapter.
To add or remove a link, change an IP address or hostname, change the advanced configuration parameters, or view the G3PD configuration, take the following steps:
1.Make sure that the G3PD is not loaded.
2.Make sure the CVLAN service is stopped. if you need to stop the CVLAN service, follow these steps:
a.From the Control Panel
b.Select CVLAN Server from the list of services.
c.Click the Stop button.
3.Click Start, point to Programs, Avaya Computer Telephony, DEFINITY G3 PBX Driver, and click G3 PBX Driver Configuration.
If the G3PD or CVLAN client is running, you will receive the following warning message:
!
WARNING:
Either the DEFINITY G3 PBX Driver or a CVLAN Client is running. Changes made to the configuration will not take effect until the next time the DEFINITY G3 PBX Driver is loaded.
4.If you receive the warning message, click OK to proceed.
Issue 1 — December 2002
DEFNETM.PDF — Avaya CT 1.2 |
