32

Event Configuration

This section describes how to configure the AXIS 213 for alarm and event handling. The AXIS 213 can be configured to perform certain actions when certain types of events occur.

Event Type

A set of parameters describing how and when the PTZ Network Camera is to perform certain

 

actions

 

 

 

 

Triggered Event page 33

the circumstances that start an event

e.g. at a signal from an external device, such as a

 

 

door switch or a motion sensor

Scheduled Event page 35

the circumstances that start an event

e.g. at a pre-programmed time

 

 

 

Action

what occurs when the event triggers

e.g. uploaded video images to an FTP server, email

 

 

notification, etc.

 

 

 

Event Servers

Event Servers are used, e.g. for receiving uploaded image files and/or notification messages. To set up Event server connections in your AXIS 213, go to Setup Event Configuration Event Servers and enter the required information according to the selected server type.

Server type

Purpose

Requires information

 

 

 

 

FTP Server

• used for uploading saved images

• Descriptive name of your choice

 

 

• User Name and Password (to FTP server)

 

 

• Upload path e.g. images/

 

 

 

• Port number e.g. port 21

 

 

 

• Use passive mode if there is a firewall between the

 

 

PTZ camera and the FTP server

HTTP Server

• used for notification messages

• Descriptive name of your choice

 

• used for uploading saved images

• URL

 

 

 

• User Name and Password (to HTTP server)

 

 

• Proxy address/Proxy port (if required)

 

 

• Proxy User Name and Password (if required)

 

 

 

TCP Server

• used for notification messages

• Descriptive name of your choice

 

 

• User Name and Password (to TCP server)

 

 

• Port number e.g. port 80

 

For details on each setting, please refer to the online help files

which are

available from each web page.

 

 

Note: Pre-trigger and Post-trigger buffers will be lost if the connection to the event server fails.

When the setup is complete, the connection can be tested by clicking the Test button (the connection test will take approximately 10 seconds).

Page 32
Image 32
Axis Communications 213 PTZ user manual Event Configuration, Event Servers