42 AXIS 213 - System Options
Caution!
Improper use may cause unexpected behavior or even cause loss of contact with the
unit. If a script does cause problems, reset the unit to its factory default settings (in
which case, a backup file may be of use to return the unit to its latest configuration).
Axis strongly recommends that you do not use this function unless you fully
understand the consequences. Note that Axis’ support will not assist with
customized scripts. For more information, please visit the Developer pages at
http://www.axis.com/developer
Plain Config - this function is for the advanced user. All parameters can be set and
modified from this page, help is available from the standard help pages.
Resetting to Factory Default Settings
To reset the AXIS 213 to the original default settings, go to the System Options |
Maintenance web page (described in Maintenance, on page 40) or use the control
button on the AXIS 213 as described below:
Using the Control Button
Follow the instructions below to reset the AXIS 213 to factory default settings using
the Control Button.
1. Switch off the AXIS 213 by disconnecting the external power supply.
2. Using a suitably pointed object, press and hold the Reset button while you
reconnect the power connector.
3. Keep the Reset button pressed for approximately 15 seconds.
4. Release the Reset button.
Note: Resetting to the factory default settings using the Reset Button will cause all parameters (including
the IP address) to be reset. Refer to Maintenance, on page 40 for other methods that do not reset
the IP address.